Once you have configured SIP settings on SPA122 you would then require to have correct UK tone settings as by default the ring and dial tones will sound wrong as they are for those used in the USA.

Setting the Tones

Now we need to set the dial tones and ringer for those used in the UK, in Voice > Regional you can see there are quite a few options to be set, but here I will only be setting the ones most commonly used.


Call Progress Tones:
Dial Tone: 350@-19,440@-22;10(*/0/1+2)
Busy Tone: 400@-20;10(.375/.375/1)
Off Hook Warning Tone: 480@-10,620@-16,1400@0,2060@0,2450@0,2600@0;60(.2/0/1,.2/0/2);240(.1/.1/3+4+5+6)
Distinctive Ring/CWT Pattern Names:
Ring1 Cadence: 60(.4/.2,.4/2)
Ring2 Cadence: 60(1/2)
Ring3 Cadence: 60(.25/.25,.25/.25,.25/1.75)
Ring4 Cadence: 60(.4/.8)
Ring5 Cadence: 60(2/4)
Ring and Call Waiting Tone Spec:
Ring Waveform: Trapezoid
Ring Frequency: 25
Ring Voltage: 60
Frequency: 400@-10
FXS Port Impedance: 370+620||310nF
FXS Port Input Gain: 0
Caller ID Method: ETSI FSK With PR (UK)