Changing Internet Username & Password along with connection type on the Technicolor Router

Step 1.- Connect to Router via WiFi or with Lan cable supplied.

Step 2. - Open your internet browser, you can use any browser such as Internet Explorer or Firefox. You may be presented with an error message when you first open the browser because you are not online; ignore this and click in the long address bar at the top.

Step 3.- and then click enter.

Step 4.- You should then get the Technicolor screen below

Click sign in button shown below


Step 5. – Use the following details to sign in with:

Login: admin

Password: On the backside of the router, There will be SN number starting with CP. You have to put that number as password.


Step 6.- Once logged in you will be presented with a menu page like the image below.

Click on the system info section.

Step 7. – You will be presented with the screen below, scroll all the way down to the bottom and click on Setup your Gateway

Step 8.- Select Connection Type and remove the setup username and enter the correct username credentials. Click Save.

Step 9. – Finally, make sure VLAN is switched off and click Save

That’s it, you’re finished. You should now be able to connect to the internet once more!